# Fast Point Feature Histograms (FPFH) descriptors

The theoretical computational complexity of the Point Feature Histogram (see Point Feature Histograms (PFH) descriptors) for a given point cloud with points is , where is the number of neighbors for each point in . For real-time or near real-time applications, the computation of Point Feature Histograms in dense point neighborhoods can represent one of the major bottlenecks.

This tutorial describes a simplification of the PFH formulation, called Fast Point Feature Histograms (FPFH) (see [RusuDissertation] for more information), that reduces the computational complexity of the algorithm to , while still retaining most of the discriminative power of the PFH.

# Theoretical primer

To simplify the histogram feature computation, we proceed as follows:

in a first step, for each query point a set of tuples between itself and its neighbors are computed as described in Point Feature Histograms (PFH) descriptors - this will be called the Simplified Point Feature Histogram (SPFH);

in a second step, for each point its neighbors are re-determined, and the neighboring SPFH values are used to weight the final histogram of (called FPFH) as follows:

where the weight represents a distance between the query point and a neighbor point in some given metric space, thus scoring the () pair, but could just as well be selected as a different measure if necessary. To understand the importance of this weighting scheme, the figure below presents the influence region diagram for a k-neighborhood set centered at .

Thus, for a given query point , the algorithm first estimates its SPFH values by creating pairs between itself and its neighbors (illustrated using red lines). This is repeated for all the points in the dataset, followed by a re-weighting of the SPFH values of using the SPFH values of its neighbors, thus creating the FPFH for . The extra FPFH connections, resultant due to the additional weighting scheme, are shown with black lines. As the diagram shows, some of the value pairs will be counted twice (marked with thicker lines in the figure).

# Differences between PFH and FPFH

The main differences between the PFH and FPFH formulations are summarized below:

the FPFH does not fully interconnect all neighbors of as it can be seen from the figure, and is thus missing some value pairs which might contribute to capture the geometry around the query point;

the PFH models a precisely determined surface around the query point, while the FPFH includes additional point pairs outside the

rradius sphere (though at most2raway);because of the re-weighting scheme, the FPFH combines SPFH values and recaptures some of the point neighboring value pairs;

the overall complexity of FPFH is greatly reduced, thus making possible to use it in real-time applications;

the resultant histogram is simplified by decorrelating the values, that is simply creating

dseparate feature histograms, one for each feature dimension, and concatenate them together (see figure below).

# Estimating FPFH features

Fast Point Feature Histograms are implemented in PCL as part of the pcl_features library.

The default FPFH implementation uses 11 binning subdivisions (e.g., each of the
four feature values will use this many bins from its value interval), and a
decorrelated scheme (see above: the feature histograms are computed separately
and concantenated) which results in a 33-byte array of float values. These are
stored in a **pcl::FPFHSignature33** point type.

The following code snippet will estimate a set of FPFH features for all the points in the input dataset.

```
1#include <pcl/point_types.h>
2#include <pcl/features/fpfh.h>
3
4{
5 pcl::PointCloud<pcl::PointXYZ>::Ptr cloud (new pcl::PointCloud<pcl::PointXYZ>);
6 pcl::PointCloud<pcl::Normal>::Ptr normals (new pcl::PointCloud<pcl::Normal> ());
7
8 ... read, pass in or create a point cloud with normals ...
9 ... (note: you can create a single PointCloud<PointNormal> if you want) ...
10
11 // Create the FPFH estimation class, and pass the input dataset+normals to it
12 pcl::FPFHEstimation<pcl::PointXYZ, pcl::Normal, pcl::FPFHSignature33> fpfh;
13 fpfh.setInputCloud (cloud);
14 fpfh.setInputNormals (normals);
15 // alternatively, if cloud is of tpe PointNormal, do fpfh.setInputNormals (cloud);
16
17 // Create an empty kdtree representation, and pass it to the FPFH estimation object.
18 // Its content will be filled inside the object, based on the given input dataset (as no other search surface is given).
19 pcl::search::KdTree<PointXYZ>::Ptr tree (new pcl::search::KdTree<PointXYZ>);
20
21 fpfh.setSearchMethod (tree);
22
23 // Output datasets
24 pcl::PointCloud<pcl::FPFHSignature33>::Ptr fpfhs (new pcl::PointCloud<pcl::FPFHSignature33> ());
25
26 // Use all neighbors in a sphere of radius 5cm
27 // IMPORTANT: the radius used here has to be larger than the radius used to estimate the surface normals!!!
28 fpfh.setRadiusSearch (0.05);
29
30 // Compute the features
31 fpfh.compute (*fpfhs);
32
33 // fpfhs->size () should have the same size as the input cloud->size ()*
34}
```

The actual **compute** call from the **FPFHEstimation** class does nothing internally but:

```
for each point p in cloud P
1. pass 1:
1. get the nearest neighbors of :math:`p`
2. for each pair of :math:`p, p_i` (where :math:`p_i` is a neighbor of :math:`p`, compute the three angular values
3. bin all the results in an output SPFH histogram
2. pass 2:
1. get the nearest neighbors of :math:`p`
3. use each SPFH of :math:`p` with a weighting scheme to assemble the FPFH of :math:`p`:
```

Note

For efficiency reasons, the **compute** method in **FPFHEstimation** does not check if the normals contains NaN or infinite values.
Passing such values to **compute()** will result in undefined output.
It is advisable to check the normals, at least during the design of the processing chain or when setting the parameters.
This can be done by inserting the following code before the call to **compute()**:

```
for (int i = 0; i < normals->size(); i++)
{
if (!pcl::isFinite<pcl::Normal>((*normals)[i]))
{
PCL_WARN("normals[%d] is not finite\n", i);
}
}
```

In production code, preprocessing steps and parameters should be set so that normals are finite or raise an error.

# Speeding FPFH with OpenMP

For the speed-savvy users, PCL provides an additional implementation of FPFH
estimation which uses multi-core/multi-threaded paradigms using OpenMP to speed
the computation. The name of the class is **pcl::FPFHEstimationOMP**, and its
API is 100% compatible to the single-threaded **pcl::FPFHEstimation**, which
makes it suitable as a drop-in replacement. On a system with 8 cores, you
should get anything between 6-8 times faster computation times.